華新科技 WALSIN

自1992年成立以來，華新科技善用產業價值鏈的策略聯盟迅速成長。如今產品線非常廣，包括積層陶瓷晶片電容、晶片電阻、射頻元件、RF天線、圓板電容、氧化鋅變阻器、電感及晶片保險絲，產品巿佔率傲人，堪稱二岸三地最具規模的元件供應商。 目前全球員工人數已達7,000；8座主要生產基地佈局於亞太地區，並透過環球50多家區域性大型分銷商的供貨與倉儲網絡，服務國際一流企業客戶 。 

以下提供完整的積層磁珠/積層電感產品組合，可滿足智慧手機､網通設備､汽車電子等各種應用。

Class I Temperature Compensation

Capacitance Range : 8pF to 820pF

Capacitance Tolerance : ±0.5pF(for 8~10pF), ±5%(for 10~820pF)

Operating Temperature Range : -25°C to +125°C

Rated Voltage : 50,100. 500,1000,2000,3000,6000 VDC

Q Factor@1MHz, 1±0.2Vrms, 25°C : C≥30 pF ……… ..Q≥1000, C < 30 pF. . . ……Q≥400+20*C

Insulation Resistance(IR)@25°C : 10,000 MΩ Minimum

Dielectric Strength : 50~500VDC: 3 times the rated WVDC; 1K,2K,3KVDC: 2 times the rated WVDC; 6KVDC: 1.5 times the rated WVDC.

Testing Parameters : 1MHz ±20%, 1.0Vrms±0.2Vrms

Data sheet >  Class I ≦2KV   Class I 3KV   Class I 6KV

Class II HI-K

Capacitance Range : 100pF to 22000pF

Capacitance Tolerance : ±10%(for Y5P), ±20%(for ZSU), +80% -20%(for Z5U&Z5V&Y5V)

Operating Temperature Range : -25°C ~ +85°C (Y5P,Y5V) ; 10°C ~ +85°C (Z5U, Z5V)

Rated Voltage : 50,100, 500,1000,2000,3000VDC

Dissipation Factor(tan δ) : Y5P, Z5U tan δ ≤2.5%, Z5V, Y5V : tan δ ≤5.0%

Insulation Resistance(IR)@25°C : 10,000 MΩMinimum or 200 MΩμF whichever is smaller

Dielectric Strength : 50-500VDC: 2.5 times the rated WVDC, 1k, 2k, 3kVDC: 2 times the rated WVDC

Testing Parameters : 1KHz ±20%, 1.0Vrms±0.2Vrms

Data sheet >  Class II 3KV Class II 6KV Class II≦2KV  Class II≦2KV (Y5V)

Class III SEMI-CONDUCTIVE

Capacitance Range : 100,000pF

Capacitance Tolerance : +80%-20%

Operating Temperature Range : -25°C ~ +85°C

Rated Voltage : 16,25 & 50 VDC

Dissipation Factor(tanδ) : Y5V 16V….. tan δ ≤7.5%, Y5V 25/50V….. tan δ ≤5.0%

Insulation Resistance(IR)@25°C : 16V ….. ..100MΩ Minimum or 10MΩμF 25/50V…1000MΩ Minimum or 20MΩμF

Dielectric Strength : 2 times the rated WVDC

Testing Parameters : 1KHz ±20%, 0.1Vrms Maximum

Data sheet >  Class III Y5V

Low Disspation

Capacitance Range : 100pF to 4700pF

Capacitance Tolerance : ±10%

Operating Temperature Range : -25°C ~ +125°C

Rated Voltage : 1K, 2K, 3K VDC

Dissipation Factor(tan δ) : LR: tan δ≤0.2%

Insulation Resistance(IR)@25°C : 10000MΩ Minimum or 200MΩμF whichever is smaller (500VDC, 60sec)

Dielectric Strength : 2 times the rated WVDC

Testing Parameters : 1KHz ±20%, 1.0Vrms±0.2Vrms

Data sheet > Class II LDF(LN) Class II LDF(LR)

Safety Certificated Caps X1/Y2_(AC series)

Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF

Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%

Operating Temperature Range : -40°C ~ +125°C

Temperature Coefficient(C Max) : -1000~+350ppml°C (SL). ±10%(Y5P), +30~80%(Y5V), +20~55% (Y5U)

Voltage Resistance :

AH Type: X1: 400Vac / Y1: 400Vac or 250Vac

AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac

AS Type: X1 : 760Vac / Y1 : 500Vac

Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC

@20°C, 1MHz, 1±0.2Vrms

Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms

Insulation Resistance : 10000MΩ @500VDC, 60sec

Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)

2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)

4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

Data sheet >  AC type X1Y2 AC type X1Y2 (small size) AC type X1Y2 pitch 5mm
AC type X1Y2 pitch 5mm(small size) AC type X1Y2_Automotive

Safety Certificated Caps X1/Y1_(AH series)

Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF

Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%

Operating Temperature Range : -40°C ~ +125°C

Temperature Coefficient(C Max) : -1000~+350ppml°C (SL). ±10%(Y5P), +30~80%(Y5V), +20~55% (Y5U)

Voltage Resistance :

AH Type: X1: 400Vac / Y1: 400Vac or 250Vac

AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac

AS Type: X1 : 760Vac / Y1 : 500Vac

Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC

@20°C, 1MHz, 1±0.2Vrms

Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms

Insulation Resistance : 10000MΩ @500VDC, 60sec

Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)

2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)

4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

Data sheet >  AH type X1Y1  AH type-X1Y1(small size)

Safety Certificated Caps X1/Y1_(AS series) 500Vac

Capacitance Range : AH:10pF to 4700pF ; AC : 10pF to 10000pF ; AS: 100pF to 4700pF

Capacitance Tolerance : ±0.25pF, ±0. 5pF, ±5%, ±10%, ±20%

Operating Temperature Range : -40°C ~ +125°C

Temperature Coefficient(C Max) : -1000~+350ppml°C (SL). ±10%(Y5P), +30~80%(Y5V), +20~55% (Y5U)

Voltage Resistance :

AH Type: X1: 400Vac / Y1: 400Vac or 250Vac

AC Type: X1 : 400Vac or 440Vac / Y2 : 250VaC or 300Vac

AS Type: X1 : 760Vac / Y1 : 500Vac

Dissipation Factor(tan δ) : SL: 30pF & above: Q≥ 1000, Below 30pF: Q≥400+20xC

@20°C, 1MHz, 1±0.2Vrms

Y5P: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

Y5U: tanδ=2.5% Max. @20°C, 1KHz, 1±0.2Vrms

Y5V: tanδ=5.0% Max. @ 20°C, 1KHz, 1±0.2Vrms

Insulation Resistance : 10000MΩ @500VDC, 60sec

Dielectric Strength : 1500Vac for 60sec(AC TYPE)(For Lead Pitch=5.0mm)

2600Vac for 60sec(AC TYPE)(For Lead Pitch=7.5&10mm)

4000Vac for 60sec(AH,AS TYPE)(For Lead Pitch=10&12.5mm)

MONO CAP RD20

Capacitance Range : 1.0pF to 22μF

Capacitance Tolerance : Within the specified tolerance.

Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)

Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)

Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC

Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)

Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms ≤1000pF：1MHz±10% 1.0±0.2 Vrms

X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

MONO CAP RD21

Capacitance Range : 1.0pF to 22μF

Capacitance Tolerance : Within the specified tolerance.

Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)

Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)

Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC

Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)

Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms ≤1000pF：1MHz±10% 1.0±0.2 Vrms

X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

MONO CAP RD30

Capacitance Range : 1.0pF to 22μF

Capacitance Tolerance : Within the specified tolerance.

Operating Temperature Range : NPO:-55~+125(NPO), -55~+125°C (X7R) , -25~+85°C(X7R)

Temperature Coefficient(ΔC Max) : 0±30(ppm/°C)(NPO), ± 15%(X7R), +30%~-80%(Y5V)

Rated Voltage : 50, 100, 200, 250, 500, 630, 1000, 2000, 3000 VDC

Insulation Resistance(IR)@25°C : NPO:10,000MΩ Min. or 500Ω*F Min X7R、Y5V:10GΩ Min or R‧C ≥ 500Ω．F(Whichever is smaller)

Testing Parameters : NPO：>1000pF：1KHz±10% 1.0±0.2 Vrms ≤1000pF：1MHz±10% 1.0±0.2 Vrms

X7R、Y5V：C ≤10uF 1KHz±10% 1.0±0.2 Vrms C>10 uF 120Hz±20% 0.5±0.2 Vrms

Data sheet

MOV Varistors

Series of Walsin Technology’s MOV Varistors is enclosed below for your reference. Or try our advanced search tool below.
For product catalog and ordering information, please download product catalog

Try our search tool and conduct product search by part number, characteristics, and series.

Standard (D Series)

Storage Temperature : -40°C to +125°C

Operating Ambient Temperature : -40°C to +125°C (without derating)

Maximum Voltage-Temperature Coefficient : < -0.05% / °C

Insulation Resistance : 1000 Mega-ohm minimum

Hi Pot (Leads To case, 1 Min.) : 2500 VDC

Typical Response Time : <25 Nano-seconds  Epoxy Rating : 94V-0  Current / Energy Derating (>85°C ) : -2.5% / °C

DC Leakage Current : 200μA maximum (at rated DC working voltage )

Solderability : MIL-STD-202F

Data sheet

High Energy (E Series)

Storage Temperature : -40°C to +125°C

Operating Ambient Temperature : -40°C to +125°C (without derating)

Maximum Voltage-Temperature Coefficient : < -0.05% / °C

Insulation Resistance : 1000 Mega-ohm minimum

Hi Pot (Leads To case, 1 Min.) : 2500 VDC

Typical Response Time : <25 Nano-seconds  Epoxy Rating : 94V-0  Current / Energy Derating (>85°C ) : -2.5% / °C

DC Leakage Current : 200μA maximum (at rated DC working voltage )

Solderability : MIL-STD-202F

Industrial

Storage Temperature : -40°C to +125°C

Operating Ambient Temperature : -40°C to +125°C (without derating)

Maximum Voltage-Temperature Coefficient : < -0.05% / °C

Insulation Resistance : 1000 Mega-ohm minimum

Hi Pot (Leads To case, 1 Min.) : 2500 VDC

Typical Response Time : <25 Nano-seconds  Epoxy Rating : 94V-0  Current / Energy Derating (>85°C ) : -2.5% / °C

DC Leakage Current : 200μA maximum (at rated DC working voltage )

Solderability : MIL-STD-202F

MLV Varistors

Series of Walsin Technology’s MLV Varistors is enclosed below for your reference. Or try our advanced search tool below.

Try our search tool and conduct product search by part number, characteristics, and series.

Surge Protection(VZ Series)

Storage Temperature : -40°C to +125°C
Operating Temperature : -40°C to +125°C
Maximum Clamping voltage : 20Vc~270Vc@1 A, 8*20 us standard current.
Maximum Capacitance : 3.5pF~10500pF @ 1 KHz.

ESD Protection at Hi-Speed Application(VH Series)

Storage Temperature : -40°C to +125°C
Operating Temperature : -40°C to +125°C
Maximum Clamping voltage : 34Vc~240Vc@1A, 8*20 us standard current.
Maximum Capacitance : 0.8pF~100pF @ 1 MHz.